OGP_mark_RGB_positive_trans


Please call Gage-Lab Products today to find a machine that fits your needs. (801) 716-2972




SmartScope® SP systems
SmartScope® SP systems are designed for optimum scanning probe performance. SmartScope SP optics combine a wide field objective lens, digital zoom, and 5 megapixel monochrome digital camera, providing a distortion-free 16 mm diagonal field of view at low zoom, with high resolution at high zoom. SmartScope SP systems are available in a range of XYZ machine travels. The SP25M scanning probe is included as standard with all SmartScope SP models. The optional TeleStar Plus laser offers very long working distance with sub-micron resolution. The on-axis and through-the-lens design allows laser measurement over the full measuring range of the system.








SmartScope_SP_332_OGP-1-650x650Screen Shot 2022-04-19 at 12.49.12 PM
XYZ Travel
Standard:
300 x 300 x 250 mm

SmartScope® SP systems are designed for optimum scanning probe performance. Starting with a rigid base structure, the system mechanics are designed to optimize dynamic data acquisition critical to scanning probe performance. Most performance specifications for SP models are according to ISO 10360 standards.
The
SmartScope SP 332 offers:

  • -High performance in a convenient benchtop package
  • -Elevating-bridge design provides machined-in squareness and a large work
  • -Envelope that uses very little floor space
  • -An air-bearing Z-axis motion system provides the friction free motion and stiffness
  • -necessary for excellent scanning probe performance













SmartScope_SP_463_OGP-1-650x867Screen Shot 2022-04-19 at 12.49.12 PM
XYZ Travel
Standard:
450 x 610 x 300 mm

SmartScope® SP systems are designed for optimum scanning probe performance. Starting with a rigid base structure, the system mechanics are designed to optimize dynamic data acquisition critical to scanning probe performance. Most performance specifications for SP models are according to ISO 10360 standards.
The
SmartScope SP 463 offers:

  • -A rugged, floor model system of proven design to handle larger, heavier parts in a workshop environment
  • -Fixed bridge design separates the primary axis motions, so they are completely independent, with no influence on each other
  • -Rigidity and stiffness give this transport superb volumetric accuracy












SmartScope_SP_663_OGP-1-650x743Screen Shot 2022-04-19 at 12.49.12 PM
XYZ Travel
Standard:
650 x 660 x 300 mm

SmartScope® SP systems are designed for optimum scanning probe performance. Starting with a rigid base structure, the system mechanics are designed to optimize dynamic data acquisition critical to scanning probe performance. Most performance specifications for SP models are according to ISO 10360 standards.
SmartScope SP 663 is a moving bridge system designed for larger, heavier parts. During measurement the part remains stationary while the optics and sensors are moved around it. SmartScope SP 663 also offers:

  • -A large measuring volume and high payload capacity in compact footprint
  • -A moving bridge design, allowing heavy parts to be loaded by a conveyor or overhead crane, if needed
  • -Granite base and granite bridge with heavy-duty cast uprights ensure thermal stability and vibration isolation even under adverse conditions








Increase your machine's performance with the right fixtures
Screen Shot 2022-04-19 at 12.38.54 PM




Back To OGP SmartScope Systems